Ceiling Fan Switch
The most common ceiling fan parts are switches, motors, mounting brackets, capacitors and pulls, just to name a few.
Aside from the blades, the most common part which will need replacing is the ceiling fan switch It is tends to break more often due to the pressure and pulling it usually gets. Over time the light switch may need replacing if it stops working.
With simple tools you can replace the ceiling fans. Turn the power off. Make sure that you turn the main power off before you start replacing the light switch. You need to turn off the circuit breaker. For a better solution, remove the fuse powering the room.
2. Dismantle the bulbs. After you locate the pull chain, use some tape to indicate which one it is. When you take out the light fixture you will find it much less confusing to locate the fan control switch. Take out the shades and light bulbs by loosening the screws that can be found at the base of each shade.
3. Take out the ballast cover. The ballast cover has light bulbs fixed to it. Be careful when unscrewing and lowering it. Do not pull the cover forcefully because it is still connected to the ceiling fan.
4. Get rid of the light fixture. Detach the fan from the light fixture by making use of the plastic wire harness connecting all the wires of the ceiling fan to the wires of the light fixture. Press down the release lever so that the wire harness will separate, and place it on a table. avoid the fan switch you marked with tape, and locate the light switch inside the fixture.
5. Replace the old switch. Unscrew the cap on the ballast cover and take out the fan light switch that you wish to change. Take note of the colors of the wires going into the fan light switch, and ensure that they match the colors of the wires coming out of the new ones.
To detach the wires from the old switches we have to unscrew the wire nuts Match one pair at a time, then connect the wires to the new light fixture switch. effect a clockwise direction, notion the nasty ends of the wires therefore fix the wire issue. To firmly place it, rotate it in clockwise direction. Do the same thing for all the identical pairs of colored wires.
6. Reassemble. All of your function is done. Put the light switch in the ballast cover then put the threaded end through the hole. Insert the pull chain in the end cap that holds the light switch. Then reconnect the wires from the light fixture to the fan.
Put new screwing on the ballast cover, then reinsert the bulbs.
Lastly, turn the fuse back on so as to test your light switch.
Should you need to find new replacement parts for your ceiling fan, you can find great fan switch choices online. As with all other electrical equipment and appliances, you should exercise care when installing new parts, and if you are really unsure of what you are doing have a professional do the work for you.
To find more information on this topic you can find it at Ceiling Fan Switch – which helps people find the best information for The Best Ceiling Fan Switch and ceiling fans parts
This entry was posted on Sunday, November 29th, 2009 at 4:11 am and is filed under General. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.